STONEX D2 Gebrauchsanweisung Seite 11

Menus Selections (sub-selections)
9. Settings
Contrast (10 levels)
Unit (M, Int. ft, US ft, Ft in 1/16 inch)
AutoOff (ON 15 min. / OFF)
Rounding (Standard / Precise)
Beep (ON / OFF)
RS232 (Baudrate: 1200, 2400, 4800,
9600, 19200, 38400; Parity: None, Odd,
Even; Stop Bit: 1, 2; Data Bit: 7, 8)
Tilt Warning (ON / OFF)
Backlight (ON / OFF)
Averaging
Language (List of interface language
selections)
Timer
Descriptions
LCD display contrast setting.
Unit setting.
ON 15 min., instrument will be switched off about 15 minutes after the last key
press. OFF, the instrument will not auto switch off.
Minimum reading display setting.
In metric:
• Standard = 0.001m for height and 0.01m for distance
• Precise = 0.0001 m for height and 0.001m for distance
In Ft (Int. and US ft):
• Standard = 0.01 ft for height and 0.1 ft for distance
• Precise = 0.001 ft for height and 0.01 ft for distance
In Ft in 1/16 inch:
• Precise & Standard = ft-inch-1/16 inch for height and distance
Trigger key acoustic signal setting.
Communication settings for RS232 interface.
Electronic tilt warning setting.
Backlight setting.
Input number of measurement for averaging of measurements.
Interface language setting.
Input measurement time interval 00 hr: 00 min (applicable to Ht / Dist applica-
tion only).
Press height / distance or dH or backlight or menu key. A message
"stop Tracking" will be displayed.
User Interface
EN
DE
FR
ES
IT
TK
RU
*
| 8
D2