A4Tech WIRELESS DESKTOP ERGO A-SHAPE Bedienungsanleitung Seite 3

Getting the receiver ready
1. Turn off the power of your
computer
2. Remove the existing keyboard and
mouse
3. Connect the receiver's purple
keyboard cable (A) to the
computer's keyboard port.
4. Connect the receiver's green mouse
cable (B) to the computer's PS/2
mouse port.
5. For the USB receiver, connect the
receiver cable (C) to the computer's
USB port.
6. Place the receiver eight inches (20
centimeters) from any
electromechanical device.
A
Getting the mouse ready
1. Remove the battery compartment cover (D) on the bottom of
B
the mouse by pressing down on the tab (E).
2. Insert the batteries (F) as shown inside the battery
compartment.
3. Replace the cover (D).
C
D
1
E
F