MC Crypt X-1200 Bedienungsanleitung Seite 25

6. Commissioning
• The fog quantity is adjusted continuously via the DMX value of the set DMX channel.
Value "0" >
Value "255" >
• When a DMX controller is connected, operation via the enclosed remote control is not possible.
Make sure that the tank never runs empty during fogging. Should this happen nevertheless, turn the
fog machine off immediately with the mains switch POWER and let it cool down.
Refill the tank after the cooling phase.
If no fog emerges, the device is still warming up or re-heating (the green indicator LED on the remote
control is not lit).
A slight continuation of fogging when the device is switched off or after unplugging is normal and does
not indicate a defect.
If you no longer require the device, remove the mains plug and let the device cool down.
Empty the tank if you are not going to use the device for a longer period. This prevents leaking of the
fog liquid during transport or storage.
no fog output
maximum fog output
25