Attaching The Stand; Remote Control - Blaupunkt BLA-215 Bedienungsanleitung

EN

Attaching the Stand

Please follow the instructions in the Stand installation leafl et, located
in the accessories bag.
Getting started - initial set up
1. Using the RF cable supplied, connect the TV to the TV Aerial wall
socket. Connect the power cable to the Electrical outlet.
2. Turn on the device with marked ON/OFF switch
3. Insert the batteries supplied into the Remote control and press the
Standby button to power on the TV.
4. You will now be welcomed with the initial set-up screen. If it does
not appear, on the remote control, please press [MENU] then 8-8-8-8
and the menu will appear. If you wish to make changes to any of the
default settings, use the scroll ▲/▼/◄/► buttons. To exit this menu at
anytime, press [EXIT] button.
5. Please select desired language, country and environment.
Set LCN to ON if you want to arrange found channels by cable provider
preferences (only applies to DVB-C channels).
To confi rm settings press [OK] button.
6. In the next step select the type of digital broadcasting. You can choose
between DVB-T (terrestrial), DVB-C (cable) or DVB-S2(satellite)*. The
analog channel will be searched automatically, as most of the cable
network includes analog channels.
Press [OK] button to start the tuning process.
7. Optional channel presets DVB-C: Select DVB-C if your TV is
connected to a cable TV network. Keep all default settings as it is
recommended.
Press [OK] button to start the tuning process.
If DVB-C channels are not found, contact your network provider for the
valid "Network ID". Then perform a new search. Press the [MENU], select
"Network ID" and enter the network ID.
8. Optional channel presets DVB-S2*: Select "Satellite" in the "Digital-
type" in the menu for the optional channel presets. Here you can
choose between the various satellites. Since selection completed, then
the channel list of the exact satellite will be available to be imported
into your TV system. This take several seconds.
Confi rm with [OK] button on the remote control, to start scanning.
TIP: If you are missing channels, the reason for this is likely to be signal
strength, you should consider connecting signal booster and re-tuning the TV.
TIP: As part of our continuing eff orts to reduce energy consumption, we added
a new Home Mode feature (appears on the fi rst installation screen). This
function helps reduce energy consumption up 15% compared to other modes.
The image brightness is reduced using Home Mode. If this setting does not suit
your environment, you can choose from other modes (Note: the Store mode is
the optimal default mode, but consumes 15% more than the Home Mode).
* - Available only for TVs with DVB-S function

Remote control

STANDBY – Switch on TV when in standby or vice versa.
MUTE – Mute the sound or vice versa.
DTV– Switch to digital TV source.
RADIO - TV/RADIO – Switch to Digital and switch between TV and radio
in Digital mode.
USB – Switch to USB source.
ATV– Switch to analog TV source.
DVD 1 – Switch to DVD mode
0 – 9 – to select a TV channel directly.
TV GUIDE – Opens the 7 Day TV Guide (Digital mode).
– To return to the previous channel viewed.
VOL ▲/▼ – To increase / decrease the sound level.
S.MODE - Scrolls through sound mode options
P.MODE - Scrolls through picture mode options
FAV – To display favourites menu.
CH ▲/▼ – To increase or decrease the channel being watched.
(▲/▼/◄/►/ OK) – Allows you to navigate the on-screen menus and adjust
the system settings to your preference.
MENU – To display OSD menu.
EXIT – To exit all menus.
SOURCE – To display the input/source menu.
INFO – Press once for now/next channel information. Press twice for
programme information about current programme.
ASPECT – To switch the screen between the diff erent picture formats.
SLEEP – Press repeatedly to cycle through the sleep options.
AUDIO – To change the audio language (if available).
SUBTITLE – To switch the dialogue at the bottom of the screen (on/off ).
TEXT – Teletext mode - To enter Teletext
TEXT HOLD - HOLD - Teletext mode - Hold current page which is displayed
TEXT/ DVD ZOOM - DVD mode - Teletext Mode - To zoom in
ZOOM - DVD mode - Teletext Mode - To zoom in -
DISPLAY – To switch off the screen when listening to radio
DVD MENU 1 – DVD mode - To display the DVD disc menu
2
Rec – PVR mode - PVR Record
DVD SETUP 1 – DVD mode - To display the DVD setup menu
Rec List 2 – PVR mode - Opens the list of recordings.
– To restart the current chapter
– To advance forward to the next chapter
/ – To stop the playback / To EJECT the disc press/hold the button for
4 seconds.
– To play in fast rewind mode.
– To play in fast forward mode.
– To play/pause
1
GOTO – DVD mode - To go to a specifi c chapter
1
A-B – DVD mode - Press once to set point, press a second time to
return to point
ANGLE 1 – DVD mode - Select diff erent angle of DVD (if available)
1
REPEAT – DVD mode - USB mode -To repeat playback
REVEAL – Teletext mode - To reveal or hide the hidden words
SIZE – Teletext mode - To change the display size in Teletext mode
1
TITLE – To display the DVD disc menu
1
D. DIS – To display the current disc information
INDEX – Teletext mode - To display the index page
Red Green Yellow Blue button- Additional teletext and OSD functions
3
3D button - Switches between 3D type settings
1 - available only for TVs with DVD players
2 - available only with PVR function
3 - Available only for TVs with 3D function
TV buttons & Source menu
Eject *
Play / Pause *
Vol+ Volume up and menu right
Vol- Volume down and menu left
CH+ Programme/Channel up and menu up
CH- Programme/Channel down and menu down
MENU Displays Menu/OSD
SOURCE Displays the input source menu
STANDBY Standby Power On/Off
* - Only for models with DVD-Player
Choosing Mode Input/Source
To switch between the diff erent input/connections.
a) Using the buttons on the remote control: