STIMA-CLS
STIMA-CLS
A.2.6 SETUP
GB
STIMA-CLS permits the confi guration of default pa-
rameters for printer and network setup by editing the
"Setup.ini" fi le on the fl ash drive.
•
This fi le contains all the confi gurable parameters
listed in text format and divided into some sections.
•
The available values for every parameter, are
listed after the parameter name. The value marked
with the symbol * is the default one.
•
To modify printer's parameters, change the numer-
ic value after the name of parameters.
•
To set the parameter to the default value, change
the numeric value with the symbol D.
•
After editing printer's parameter, simply save the
"Setup.ini" fi le to make the modifi es activated.
The "Setup.ini" fi le permits the confi guration of the fol-
lowing parameters:
[PRINT]
[PRINT]
Printer Emulation
Print Mode
Autofeed
Chars / inch
Speed / Quality
Paper Width
Paper Threshold
Notch Position
Notch Threshold
Notch Distance [mm]
Ticket Locking
PaperEnd Buffer Clear
Short Ticket
Print Density
[INTERFACE]
[INTERFACE]
RS232 Baud Rate
RS232 Data Length
RS232 Parity
RS232 Handshaking
Busy Condition
USB Mass Storage
USB Address Number
Note: To know the available values for every param-
eter, see par. "Printer Setup" and "Ethernet Setup".
Appendix
Appendix
I
STIMA-CLS consente di confi gurare i parametri di default
della stampante e della rete tramite la modifi ca del fi le
"Setup.ini" presente su fl ash drive.
•
Questo fi le contiene tutti i parametri confi gurabili elen-
cati in formato testo e divisi in sezioni.
•
I possibili valori per ogni parametro sono elencati di
seguito al nome del parametro stesso. Il valore indica-
to dal simbolo * è il valore di default.
•
Per modifi care i parametri, cambiare il valore numeri-
co che segue il nome del parametro.
•
Per impostare un parametro sul valore di setup, cam-
biare il valore numerico con il simbolo D.
•
Dopo aver modifi cato i parametri, è suffi ciente salvare
il fi le "Setup.ini" per rendere attive le modifi che.
Il fi le "Setup.ini" consente di confi gurare i seguenti para-
metri:
[NETWORK]
[NETWORK]
DHCP Client
FTP Server
FTP Server
Subnet Mask
Default Gateway
Domain Name System
TCP Printer Port
MAC Address
[SVELTA]
[SVELTA]
Ticket X Dimension
Ticket Y Dimension
Notch Distance
Notch Width
Barcode Timeout
Ticket Offset X
Ticket Offset Y
Nota: Per conoscere i possibili valori per ogni parametro,
vedere i paragrafi "Printer Setup" e "Ethernet Setup".
<45>