Appendices; A Maintenance; B Overview Of Menu Structure - Epak-Tv Basic Line Tv44 Handbuch

APPENDICES

A Maintenance

The satellite tracking system EPAK-TV does not require a lot of maintenance. The following in-
structions are sufficient to sustain the optimal capacity of the antenna unit:
• Clean the radome once a month, using fresh water and a mild detergent to remove dirt and salt
deposits.
• Do not detach the radome!
• Do not spray directly on the radome with high pressure water from a hose!
• Check cable connections to be tight and free of corrosion. Clean the cables regularly.
The radome has a protective layer of UV-stabilized and maritime climate-proof lacquer. Do not
apply any additional paint, wax, preservative, solvent, chemicals or adhesive labels. Any kind of
coating will void warranty claims!
In case any solvent comes in contact with the radome by accident, rinse the area immediately with
water and, if necessary, with a mild detergent!
1) Always possible, as long as free satellite storage positions are available.
2) Only shown in the display if the respective satellite storage position is occupied.
3) Only the occupied satellite storage positions are shown.
4) Confirm function by pressing  , abandon by pressing
5) Function has to be carried out in the harbor in calm waters.
6) Standby mode can quickly be reached from all menus by short press on the
7) Display flashes.
8) TV46/60 models only, when at least one satellite is stored and the receiver supports this feature
(DiSEqC™).
9) Special functions in standby mode.
26
English
 .
key.


B Overview of menu structure

serial no.
XXXXXXX
6)
Standby
8)
AutoSat
searches and tracks stored satellite (Sat 1...4 will be selected by receiver)
2)
Sat 1 searches and tracks stored satellite 1
2)
Sat 2 searches and tracks stored satellite 2
2)
Sat 3 searches and tracks stored satellite 3
2)
searches and tracks stored satellite 4
Sat 4
Setup ---- Tracking On
password
request
Off
FastScan On
Off
LNB Type
settings of LNB-type and skew (angle)
1) 5)
New Sat ScanBand?
Upd Sat UpDate?
3)
Del Sat Sat 1
Sat 2
Sat 3
Sat 4
cancel
Comp Cal UpDate?
quit
counter software version software version
operation time antenna unit control unit
T XXXXX VA X-XX VC X-XX
9)
Standby
tracking of stored
LIN -70
satellite LIN -60
LIN -10
LIN 0 (Standard)
LIN +10
LIN +20
durring searching
of stored satellites
LIN +70
Circular
Band 1
7)
Band 2
Search? New Sat
Band 3
searching new satellite
Band 4
Sat X update satellite data
2)
2)
4)
2) deletes selected satellite
Delete?
2)
5)
calibrate compass
Compass
English
27