KERN DAB-A01 Betriebsanleitung Seite 8

 Confirm by
 Use the arrow keys
first or the first two digits select a value and confirm by
 Using arrow keys
 Confirm input by
Begin temperature calibration:
 Switch on temperature calibration set.
 Close heating hood and press
to the set temperature. The current temperature and the elapsed time will be in-
dicated in the display.
 After approx. 15 minutes finish by
moisture analyser with that of the temperature calibration set. At a difference of
±5°C we recommend to adjust the temperature, see following chapter.
8
, the currently set drying temperature flashes.
to enter the desired test temperature. For the
select the desired value for the last digit.
.
. The instrument will be automatically heated
. Compare the temperature value of the
.
DAB_A01-BA-def-1510