Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
Calibrate / adjust temperature of the heating module
1. Temperature calibration
We recommend performing occasional tests of the instrument's temperature value,
using the optional temperature calibration set KERN DAB-A01.
Before you do this, allow the device to cool down for at least 3 hours after the last
heating phase.
Preparation:
Switch off moisture analyser
Install temperature calibration set as per illustration
Turn on moisture analyser
6
KERN DAB-A01
Version 1.0 07/2015
Operating Instructions
Temperature calibration set
DAB_A01-BA-def-1510
Werbung
