Herunterladen Inhalt Inhalt Diese Seite drucken

IROX Mete-On 1 Kurzanleitung Seite 6

Vorschau ausblenden Andere Handbücher für Mete-On 1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Errors and corrective actions
ERROR
• Time and Day
are completely wrong
• The Meteotime-Icon in
the Status window is not
fully activated.
• The forecasts are not
complete or missing
completely.
• the time signal icon
has no
«waves».
• Low Bat.
• the Meteotime Icon in the
relevant forecast window
is not fully displayed
• no function, no regular
display, no reaction to
any keypress
Notes
6
REASON
The time signal recep-
tion is interrupted or
disturbed.
The time signal
reception is inter-
rupted or disturbed.
The Mete-On  was
not able to receive a
good time signal in
the last  hours.
The batteries are used
up.
This piece of the fore-
cast has not been
fully received.
After a battery
exchange, the unit
has not started up
correctly.
An unusal and very
strong electrical
occurance has created
a problem in the
unit's processor.
WHAT TO DO
The position and location of the Mete-On  are not
suitable. Find a new place with good reception.
For this use the «Reception Test» described
in the Operating Instructions.
The position and location of the Mete-On  are not
suitable. There may be electrical interferances in the
surroundings or the signal may not get to the unit.
Find a new place with good reception or move
the electrical device to a place min. m away
For this use the «Reception Test» described
in the Operating Instructions.
The position and location of the Mete-On  are not
suitable. Find a new place with good reception.
For this use the «Reception Test» described
in the Operating Instructions.
Replace the batteries with new ones
(4x Batteries LR6 AA - Alkaline or better)
Most likely the reception was interrupted or
disturbed by a one-time interference. If this
status remains over repeated days, find another
place or remove potential sources of a problem.
Remove all batteries and press the key «LIGHT» to
make sure any remaining power in the unit is
discharged. After this, reinsert the batteries.
or
Press the RESET contact in the battery
compartment.

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis