Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Document shredder IPS050D
Item no. 88 34 83
1.
Intended use
This product is designed for shredding paper, CDs and credit cards. The separate collection container allows
the separation of shredded CDs from shredded paper and credit cards. Power is supplied via a standard mains
socket (230 V/AC, 50 Hz). The product should only be used in dry indoor areas.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. In addition, improper use can
cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and keep them.
Make this product available to third parties only together with its operating instructions.
2.
Delivery content
•
Document shredder
•
Operating instructions
3.
Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
Persons / Product
•
Do not reach into the feeder slot.
•
Do not insert paper pin, staples or any other metal parts into the feeder slot.
•
Keep long hair away from around the feeder slot.
•
Keep ties, scarves, loose clothing and long necklaces or bracelets away from the feeder slot.
•
Do not use spray bottles / cans in the immediate vicinity of the product.
•
The device is not a toy. Keep it out of the reach of children and pets.
•
Do not leave packaging material lying around carelessly. These may become dangerous playing material
for children.
•
Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity, moisture,
flammable gases, vapours and solvents.
•
Do not place the product under any mechanical stress.
•
If it is no longer possible to operate the product safely, take it out of operation and protect it from any
accidental use. Safe operation can no longer be guaranteed if the product:
-
is visibly damaged,
-
is no longer working properly,
-
has been stored for extended periods in poor ambient conditions or
-
has been subjected to any serious transport-related stresses.
•
Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage the
product.
•
Unplug the mains plug from the mains outlet before cleaning the product or storing it for a longer period.
•
Do not operate the device for longer than two minutes to avoid overheating the motor.
•
The product should not be connected immediately after it has been brought from an area of cold
temperature to an area of warm temperature. Condensed water might destroy the product. Wait until the
product stabilising to adapt to the new ambient temperature before use.
Miscellaneous
•
Consult an expert when in doubt about operation, safety or connection of the device.
•
Maintenance, modifications and repairs are to be performed exclusively by an expert or at a qualified
shop.
•
If you have questions which remain unanswered by these operating instructions, contact our technical
support service or other technical personnel.
4.
Operating elements
1
2
5.
Operation
1.
Place the shredder on a level surface.
2.
Plug the mains plug into a mains socket.
Shredding paper
•
Do not insert more than 5 sheets of paper (size DIN A4 with a maximum grammage of
80 g/m
) into the insertion slot.
2
•
Do not shred adhesive notes or paper with remains of adhesive.
1.
Slide the selector switch to the left into the "AUTO" position.
2.
Now, carefully insert the paper into the insertion slot. The paper will automatically be fed in and shredded.
3.
When finished, slide the selector switch to the central position "OFF".
Version 05/11
3
1.
Selector switch
2.
CD/credit card insertion slot
3.
Paper insertion slot
Shredding CDs / credit cards
Shred only one CD / credit card at a time.
1.
Attach the small collection container onto the retaining fixture within the collection container.
2.
Slide the selector switch to the right, into the "CD/Card REV" position. The motor is now permanently
turned on.
3.
Next, carefully insert a single CD / credit card into the CD / credit card insertion slot. The CD / credit card
will be fed in and shredded.
4.
When finished, slide the selector switch to the central position, "OFF".
Clearing paper jams
1.
Slide the selector switch to the right, into the "CD/Card REV" position.
2.
The cutting unit will now run in the reverse direction and push the jammed paper out again.
3.
When finished, slide the selector switch to the central position, "OFF".
6.
Troubleshooting
Problem
Cause
The cutting unit continuously
The paper container is full and
keeps on running in the "AUTO"
the paper from the cutting unit
position.
cannot feed through.
After shredding, there are still
The remaining pieces of paper
pieces of paper remaining in the
are stuck between blades.
cutting unit.
The paper was inserted into the
The automatic feed stops,
insertion slot at an angle.
however there is still paper in the
The paper is too soft, thin, damp
insertion slot.
or creased.
The device does not work,
although no pieces of paper
The motor is overheated.
remain in the feeder.
7.
Disposal
In order to preserve, protect and improve the quality of environment, protect human health and
utilise natural resources prudently and rationally, the user should return unserviceable product to
relevant facilities in accordance with statutory regulations.
The crossed-out wheeled bin indicates the product needs to be disposed separately and not as
municipal waste.
8.
Technical data
Operating voltage:
230 V/AC, 50 Hz
Power consumption:
max. 1.4 A
Safety level:
3 (DIN 32757)
Noise level:
72 dB
Shredding speed:
2 m/min
Container volume:
13 l
Dimensions (W x H x D): 315 x 195 x 320 mm
Weight:
3.1 kg
These operating instructions are published by Conrad Electronic SE,
Klaus-Conrad-Straße 1, D-92240 Hirschau/Germany.
All rights including translation reserved. Reproduction by any method, e.g.
photocopy, microfilming, or the capture in electronic data processing systems
require the prior written approval by the editor. Reprinting, also in part, is prohibited.
The operating instructions reflect the current technical specifications at time of print.
We reserve the right to change the technical or physical specifications.
© 2011 by Conrad Electronic SE.
Solution
Unplug the mains plug and empty
the container.
Slide the selector switch into the
"CD/Card REV" position.
Ensure the paper is straight as it
goes into the insertion slot.
Fold, dry or flatten the paper.
Leave the device to cool down
before putting it into operation
again.
V1_0511_02-SB
Werbung
