Intended Use; Operation - Renkforce 1361501 Bedienungsanleitung

Operating instructions
6.35 cm (2.5") SATA hard drive housing

Intended use

The hard drive housing is designed to operate a hard disk drive with a SATA connection
rights reserved.
Hard drive housing
Screwdriver
Operating instructions
low height can damage the product.
which are connected to the product.
product for a prolonged period of time.
Never move the product when the inserted hard disk drive is in use.
drive.
scratches and dents.
the device.
personnel.
Inserting a hard disk drive
Slide the installation frame in the inside of the hard drive housing out of the housing
to the side in the direction of the USB connection.
to the orientation of the hard disk drive and ensure that the connector on the circuit
product through the side cover.
Tighten the screws with moderate force using the screwdriver included with the
product.
when moving and transporting the hard drive housing if a hard disk drive is inserted.
driver is therefore not included with the product.

Operation