Operation - TESTBOY TV 216N Bedienungsanleitung

Operation

Thank you for purchasing the Testboy
The Testboy
Category CAT III and for voltages that do not exceed the
reference to earth 600 V (AC or DC).
Operation
Before taking a measurement, allow the appliance to
acclimatize.
| When using this tong meter, the user must adhere to all usual
safety regulations.
| When using in the vicinity of appliances that cause
interference or noise, the display can indicate gross errors.
| Only use the appliance as described in these operating
instructions, because the protective equipment of the
appliance could be impaired.
| To prevent damage to the appliance, do not exceed the
maximum input values given in the Technical Data.
| Pay attention to the function switch and make sure that it is
set at the correct position before each measurement.
| Particular attention must be paid for tasks on naked cables or
busbars.
| Every inadvertent contact with the conductor can result in an
electric shock.
| Caution when working with voltages of more than 60 V DC or
30 V AC RMS. At such voltages, there is the danger of electric
shocks.
| Before switching to other functions, the tongs must be
removed from the circuit to be tested.
®
Testboy
TV 216N
®
TV 216N is intended for measuring systems of
®
TV 216N
Operation
39