Osd (On-Screen Display) Menu - wortmann MD19MS Bedienungsanleitung

OSD MENU
1. Brightness: The adjusting range is from 0 to 100.
2. Contrast: The adjusting range is from 0 to 100.
3. Clock/Phase:
(Phase) and (Clock) separately. The adjusting range is from 0 to 100.
Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the screen
shows horizontal disturbances. Clock (pixel frequency) controls the number of pixels scanned
by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and
the image is not proportional.
4. Position: Adjusts the horizontal postition (H-Position) and the vertical position (V-Position) of
the image. The adjusting range is from 0 to 100.
5. Auto Adjust: In this function, that will be activated the auto adjusting for the picture.
6. Volume: The adjusting range is from 0 to 100.
7. Mute: That could push the "+" or "-" key to switch the mode of audio mute.
Reduces Horizonal-line noise and Vertical-line noise of the image by adjusting
4