Werbung
Q4. How do I choose my PSU for Xpressar™ RCS100?
Ans. The system build with Xpressar™ RCS100 need extra 100W of power consumption.
Please use Thermaltake PSU calculator to find out the suitable PSU for your system.
http://www.thermaltake.outervision.com
Q5. What kind of power connector does Xpressar™ RCS100 use?
Ans. The Xpressar™ RCS100's input is DC 12V. It's compatible with standard PSU 4 pin
connector. Notice: Please do not connect any other device on the same cable which
Xpressar™ RCS100 is using.
Q6. How long does Xpressar™ RCS100 starts to cool the system when it turns on?
Ans. Xpressar™ RCS100 needs five minutes to reach the maximum cooling capability
after system start.
Q7. Will continues switch on/off damage the compressor?
Ans. Thermaltake recommends user to wait for 15 sec to restart their Xpressar™ RCS100
once they have shut down their system. However, soft-reset could be restart
immediately cause compressor has not turn-off during soft-reset.
Install and Compatibility Questions:
Q1. Does Xpressar™ RCS100 support AMD platform?
Ans. At this stage, Xpressar™ RCS100 only support Intel platform. Thermaltake is
developing AMD platform and is coming soon next year.
Q2. Does Xpressar™ RCS100 support Intel coming new LGA1366 platform?
Ans. Yes, Xpressar™ RCS100 series has LGA775/LGA1366 clip inside the package.
Q3. Is there any limitation for VGA card when installing into Xpressar™ RCS100?
Ans. Please check section 1.2 in user's manual (Compatibility guideline, page 3)
for detail information.
Q4. What kind of motherboard does Xpressar™ RCS100 support?
Ans. Xpressar™ RCS100 supports standard LGA775/LGA1366 motherboards.
If the first PCI express slot is at the first slot on the motherboard, the VGA card
can't be installed cause the interference of the copper tube. Please install the
VGA on the second PCI express slot if the motherboard supports dual VGA.For
detail information, please check section 1.2 in user's manual
(Compatibility guideline, page 2&3).
34
RCS100 series
Note:
Werbung
