Conrad 1218293 Bedienungsanleitung Seite 5

Game camera HD, 12 MP
Item no. 1218293
Intended use
This game camera is intended for taking pictures and videos and is equipped with a PIR sensor. The PIR
sensor (passive infra-red) recognizes a sudden change in the ambient temperature, which is triggered by
game, for example. The camera is ideal for observing wildlife as it can be fastened temporarily to various
objects. The product can be flexibly fastened to trees, pipes or similar round objects using the included
fastening strap. Single photos, videos and time lapse recordings can be taken with the camera. The camera's
menu can be set to various languages (e.g. German, English, French). The pictures and videos are stored
on an SD card (not included in the scope of delivery). The pictures or videos taken can then be copied onto
a computer and viewed on a monitor.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use the
product for purposes other than those described above, the product may be damaged. In addition, improper
use can cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and
keep them. Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Game camera
• AV cable (length approx. 145 cm)
• USB cable (length approx. 90 cm)
• Fastening strap (length approx. 175 cm)
• Operating instructions
Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
a) Persons / Product
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become dangerous
playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
• Also observe the safety and operating instructions of any other devices which are connected
to the product.
• The camera is weatherproof and is suitable for outdoor use. Nevertheless, make sure that the
camera is not submerged in water or other liquids as failure to do so causes damage to the
camera. Do not expose the operating device to damp or wet.
• Do not expose the game camera for long periods to direct sunshine. It can be damaged by
overheating. Install the game camera so it lies in the shade.
• Never touch the contacts (15, 17) of the camera and battery box with a metal object. This can
trigger a short circuit and damage the camera.
• Do not use the camera for direct surveillance of persons.
b) Batteries
• Correct polarity must be observed while inserting the batteries.
• Batteries should be removed from the device if it is not used for a long period of time to avoid
damage through leaking. Leaking or damaged batteries might cause acid burns when in
contact with skin, therefore use suitable protective gloves to handle corrupted batteries.
• Batteries must be kept out of reach of children. Do not leave batteries lying around, as there is
risk, that children or pets swallow them.
• All batteries should be replaced at the same time. Mixing old and new batteries in the device
can lead to battery leakage and device damage.
• Batteries must not be dismantled, short-circuited or thrown into fire. Never recharge non-
rechargeable batteries. There is a risk of explosion!
c) Miscellaneous
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert or at a
qualified shop.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
Operating elements
1
Version 02/15
2
3
4
5
6
7
8
9
10
Rear with display and buttons
17
18
19
20
21
22
23
24
1 Upper LED field (19 IR LEDs, red LED power
indicator and light sensor)
2 Camera lens
3 PIR sensor
4 Lower LED field (21 IR LEDs)
5 Bottom cover
6 Rubber cover for power supply connection
7 Tripod connection
8 Lock screw
9 Fastening strap
10 AV cable
11 USB cable
12 Fixing screw (one screw on top and bottom)
13 Clamp
14 Battery compartment lid
15 Contacts
16 Battery box
17 Contacts socket
Battery and mains operation
a) Battery operation
1. 4 pieces 1.5 V/DC type AA/LR6 batteries are necessary for operation. If possible use high quality alkaline
batteries. The battery level will be shown on the LC display.
2. Open the bottom cover (5). To do so, loosen the lock screw (8) so the bottom cover can be flipped out.
3. Press the PUSH marking on the battery compartment lid (30) to open the lid.
4. Please note the correct polarity. 2 batteries must be inserted into a compartment with the same polarity.
The polarity is indicated with + and - on the battery compartment cover. The corresponding battery pole
must point upwards in the direction of the battery compartment cover.
5. Close the battery compartment cover.
Bottom with battery compartment
29
30
28
27
31
32
26
33
25
34
18 LC display
19 ▲ button
20 M button
21 ◄ button
22 ON / OFF switch
23 / switch (photo / video)
24 Fixing thread (one thread on top and bottom)
25 IR LED switch 19 / 40 (19 or 40 LEDs)
26 ON / OFF switch (button without function)
27 ▼ button
28 OK button
29 ► button
30 Battery compartment lid
31 12V power supply connection
32 SD card slot
33 Mini USB connection
34 TV connection
16
15
14
13
12
11