Audio Continuity Test; C/° F Temperature Measurement - Metrix MX 670 Bedienungsanleitung

4.5.2 Audio Continuity Test˘ ˘ ˘ ˘
Connect the red test lead to the "+" terminal and the black test
lead to the "COM" terminal.
Put the touch prods into contact with the circuit to be tested.
If the resistance value of circuit R<35 Ω , the buzzer sounds
continuously.
Note: Always check that the circuit is disconnected from the
power supply before measuring continuity!
4.6 ° C/° F Temperature Measurement
MX670 / MX675
Set the switch to TEMP.
To measure the temperature,
connect the type K
thermocouple probe to the input
terminals, observing the
polarity.
The main display is in degrees
Celsius (° C) by default, and the
secondary display in degrees
Fahrenheit (° F). The user can
change the main display to
degrees Fahrenheit (° F) and
the secondary display to
degrees Celsius (° C) by
pressing the DISPLAY key.
29