Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
count-down mode (Timer mode)
-
Set the desired count-down time with the buttons MIN (4) and SEC (5):
Press MIN to set the minutes
Press SEC to set the seconds
-
Press the button S/S (6) to start the count-down timer.
-
While the timer runs down, the S/S button (6) flashes green.
-
Press the button S/S (6) again to stop the count-down timer or to start it again.
-
When the time running down has reached 00:00, an alarm signal sounds, the
time display runs forward again and the S/S button (6) flashes red.
-
Press the button S/S (6) to stop the alarm signal.
If the alarm is not stopped, it switches off automatically after one minute.
-
The previously set count-down time appears again in the display.
As soon as a count-down time has been set, the count-down symbol (down
arrow) appears in the display.
The timer can then be used only as a count-down timer.
In order for the timer to be used again as a count-up timer, the programmed
count-down time must be deleted again by pressing the buttons MIN (4) and
SEC (5) at the same time.
Programming the count-down time memory
With this function, you have the option to save up to three fixed time settings for
the count-down timer so that you do not always have to enter the count-down time
again.
This is especially an advantage if you want to use a frequently recurring time set-
ting.
You can program as many as three time presets.
-
Press one of the buttons M1 (1), M2 (2) or M3 (3) for about 2 seconds, until the
display indicator blinks.
-
Set the desired count-down time with the buttons MIN (4) and SEC (5):
Press MIN to set the minutes
Press SEC to set the seconds
-
Press the corresponding memory button M1 (1), M2 (2) or M3 (3) again or wait 30
seconds to store the set count-down time.
-
Thereafter, the programmed count-down time can be recalled repeatedly by
pressing the respective memory button.
To store a new time default, simply repeat the procedure described above
and thereby overwrite the old programming.
-
The use of a count-down timer with the time preset is the same as the use of a
normal count-down timer (see further above).
setting the alarm signal
The alarm volume is set with the switch mute/lo/hi (7):
-
mute: Alarm is muted
-
lo: quiet alarm volume
-
hi: loud alarm volume
mainTenance anD cleaning
The product does not require any maintenance and should never be disassembled
for any reason.
Please use a soft, dry, clean cloth for cleaning.
Do not use any chemical cleaning agents, as they can discolour the plastic housing.
DisPosal
a) Product
Electronic devices are recyclable waste materials and must not be disposed
of in the household waste!
Please dispose of the product, when it is no longer of use, according to the
current statutory requirements.
Remove any inserted battery and dispose of it separately from the product.
b) batteries and rechargeable batteries
The end user is legally obliged (Battery Regulation) to return used batteries and
rechargeable batteries. Do not dispose of used batteries in the household waste!
Contaminated batteries/rechargeable batteries are labelled with these sym-
bols to indicate that disposal in the domestic waste is forbidden. The sym-
bols for the relevant heavy metals are: Cd=cadmium, Hg=mercury, Pb=lead
(marking can be seen on the battery/rechargeable battery, e.g., underneath
the refuse bin symbol shown on the left).
You can dispose of your used batteries/rechargeable batteries free of charge at your
community's collection point or any place where batteries/rechargeable batteries
are sold!
You thereby fulfil your statutory obligations and contribute to the protection of the
environment.
Technical DaTa
Operating voltage:
3 V/DC (2 batteries of type AAA/Micro)
Current consumption:
max. 26 mA
Battery life:
approx. 3 years
Time preset storage:
3
Max. time display:
99 min 59 s
Dimensions:
91 x 60 x 21 mm
Weight:
68 g
Operating temperature:
0 to +45 °C
Storage temperature:
-15 to +55 °C
These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1,
D-92240 Hirschau (www.conrad.com). All rights including translation reserved. Reproduction by
any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems
require the prior written approval by the editor. Reprinting, also in part, is prohibited. These ope-
rating instructions represent the technical status at the time of printing.
© copyright 2014 by conrad electronic se.
Werbung
Inhaltsverzeichnis
