Maintenance And Cleaning - VOLTCRAFT PL-135 HAN Bedienungsanleitung

b) Connecting the meter to a PC
1. Connect the USB cable's Mini-USB plug to the meter's Mini-USB port (5).
2. Connect the USB cable's USB A plug to a free USB port on the computer.
3. Push the on/off button (6) to turn on the product.
4. Open the software.
5. You can find more information on the software and its functions in the instructions for
use, which you can access via the software help menu.

12. MAINTENANCE AND CLEANINg

Do not use any aggressive cleaning agents, rubbing alcohol or other
chemical solutions as they can cause damage to the housing and
malfunctioning.
• Before cleaning, disconnect the USB cable from the product and push the metallic
protective sleeve (2) over the sensor head (1).
• Never submerge the product in water.
• There are no components located inside the product you need to maintain. Never
open/dismantle the product.
• To clean the product, a dry, soft and clean cloth is sufficient. Do not apply too much
pressure to the housing to prevent scratching.
• Use a longhaired, soft and clean brush and a vacuum cleaner to easily remove dust.
35