GEV LZV 6256 Bedienungsanleitung Seite 5

Recycling-Hinweise
Dieses Gerät darf nicht mit dem unsortierten Hausmüll
entsorgt werden. Besitzer von Altgeräten sind gesetzlich
dazu verpfl ichtet, dieses Gerät fachgerecht zu entsorgen.
Informationen erhalten Sie von Ihrer Stadt-
Gemeindeverwaltung.
Technische Daten
Betriebsspannung 230 V ~, 50 Hz
Schaltleistung 3.680 W
Nennstrom max. 16 A ohmsche Last,
max. 2 A induktive Last (z. B. Motoren)
Speicherplätze 40 (20 x AN/20 x AUS)
Prüfzeichen INTERTEK/GS
Typ TE103
Abmessungen B 73 x H 74 x T 76 mm
Technische und optische Änderungen ohne Ankündigung
vorbehalten.
Gutkes GmbH
Postfach 730 308 Fax: +49 (0)511 / 958 58 05
30552 Hannover Internet: www.gev.de
Deutschland E-Mail: service@gev.de
bzw.
6
Digital timer LZV 6256
Operating elements (Fig. A)
1 LCD display
2 Reset button (RST) and LCD test
3 Random function on/off (RND)
4 Programming button (SET)
5 Start/stop programmed countdown time (CTD)
6 Manual on/off (OVER)
7 Adjusting button and also programming for switch-off/
switch-on time ( )
8 Adjusting button and also countdown programming (
9 24h/12h toggle and also end programming (TIME)
10 Status display (illuminated = socket connected)
LCD display explained (Fig. B)
MO = Monday
TU = Tuesday
WE = Wednesday
TH = Thursday
FR = Friday AUTO = timer is in programmed
mode
SA = Saturday
PROG = programming mode
SU = Sunday
+ 1h = summer time
CTD = countdown function enabled
ON = ON
RND = random function enabled
OFF = OFF
Safety instructions
Under no circumstances does the warranty cover
damage resulting from failure to observe these
instructions. Nor do we accept liability for any
indirect damage. Similarly, we can accept no
liability for any material damage or bodily injury caused by
mishandling or failure to observe the safety instructions. In
these cases, no warranty or guarantee claim may be made.
In addition, for safety and compliance reasons, you are not
authorised to dismantle or alter the device in any way.
Do not plug several of these devices into the same socket.
Unplug to disconnect the power supply.
)
Initial activation
Plug the timer into a mains socket to enable the in-built reserve
battery to charge. As soon as the LCD display shows the time,
you can start adjusting the settings.
- Reset/delete all settings
Press the reset button (2) with a pointed object. This deletes all
the data and is necessary in order to set the clock. All visible
symbols (test function) will appear in the display (1) for approx.
5 seconds, followed by the time 00:00:00 MO AUTO/OFF.
Setting the time
Please note that if no entry is made within around
10 seconds, the timer will revert to the time display. Any
information already entered will be stored.
Before setting the time, switch to summer time if necessary
(+ 1h). See section "Daylight saving time".
7