Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
FM OPERATION
Selecting the FM function
Press FM/DAB&DAB
When in FM mode, the frequency of the station is being listened will appear on the display.
"St" will be showed if stereo is activated
In FM mode, you can use Auto Scan and Manual Tuning two methods.
For Auto Scan method, briefly press SELECT/MENU, the radio will immediately scan all available
stations which are currently broadcasting. The frequency of that station will be on the top line of the
display.
For Manual Tuning, briefly press the "UP" or "DOWN" buttons.
The frequency display will be changed in 50kHz steps up or down the FM band. Press and hold the
"UP" or "DOWN" button will advance or decrease the selected frequency rapidly in 50 kHz steps until
available station is reached.
Scan setting
Press and hold the SELECT/MENU button, then press UP or DOWN button until the display shows
"SCAN SETTING", then press SELECT/MENU button again, now you can press UP or DOWN button
to choose Strong stations only or All stations, then press SELECT/MENU button to confirm
Audio setting
Press and hold the SELECT/MENU button, then press UP or DOWN button until the display shows
"Audio setting", then press SELECT/MENU button again, now you can press UP or DOWN button to
choose "Stereo or mono" or "Mono only", then press to SELECT/MENU button to confirm.
Storing and Recalling Preset Frequencies in FM
Up to 8 FM frequencies can be stored into preset memories.
To preset memories are in the form of a list of preset locations numbered 1 to 8.
Storing a Frequency as a preset
To store a frequency into a preset location
1. Tune on the radio to the required frequency.
2. Press and hold the preset locations number (1-4) for about 3 seconds, until "Preset Stored"
appears on the display.
3. Hold SHIFT button and then hold preset number (5-8) for about 3 seconds, until "Preset Stored"
appears on the display.
Recalling a Preset Frequency
To recall a preset frequency
1. Briefly press the preset locations number buttons (1-4), and the current frequency stored in the
Preset location will be displayed.
+
mode button, the display will show "FM".
Page 8
Werbung
Inhaltsverzeichnis
