Marmitek TV Anywhere Wireless HD Gebrauchsanleitung Seite 17

I get no picture from the TV Anywhere app
Move the HD transmitter from the immediate vicinity
x
of the connected HDMI sources and Wi-Fi equipment. These may affect the
range.
Slightly adjusting the position of the HD transmitter may already help out.
x
You are at the edge of its range. Try using shorter distances.
x
Disconnect the power adapter from the wall socket and reconnect it to reboot the
x
HD transmitter.
Turn the Wi-Fi on your smartphone/tablet on and off, and then try connecting to
x
the HD transmitter's Wi-Fi network again.
Close the app manually and restart it.
x
I have no internet connection when using the app
Once your smartphone/tablet is connected to the HD transmitter's Wi-Fi network,
x
the internet connection on your smartphone/tablet will be inactive. You will still
receive phone calls and text messages as usual.
When you have finished watching a film on your smartphone/tablet and want to
x
restore the use of an internet connection, return to the settings menu of your
smartphone/tablet and reconnect with your own Wi-Fi network. You can also
achieve this by turning off the transmitter.
I do have picture, but no (or bad) sound
The TV Anywhere Wireless HD supports up to 2CH PCM stereo.
Check the audio setting in the settings menu of the connected HDMI source and
x
manually set it to 2CH PCM stereo when the automatic setting does not work.
The IR return function is not working
Ensure that you did not connect the IR receiver and IR led cable the wrong way
x
around, and that they are fully plugged in.
Experiment with the location of the IR receiver and IR led cable.
x
The IR receiver has a reception sensitivity of max. 10 metres.
x
The range is also dependent on the remote control used.
x
Do you have any questions that are not answered here? Then please visit
www.marmitek.com
TV Anywhere Wireless HD™
17