Herunterladen Inhalt Inhalt Diese Seite drucken

Charging A Mobile Phone; Maintenance And Cleaning; Technical Data - Renkforce 1152758 Bedienungsanleitung

Camping-leuchte mit powerbank
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Charging a mobile phone
• Connect your mobile phone via its USB charging cable to the USB-A socket (6) of the
camping lamp.
• The charging procedure of the mobile phone starts.
• You can display the charge level of the camping lamp's rechargeable battery by
briefly pressing the operating key (5), see chapter "Displaying the charging level of
the rechargeable battery".
A deep discharge of the rechargeable battery in the camping lamp while
charging your mobile phone is not possible. The charging procedure of the
mobile phone is ended early enough when the rechargeable battery of the
camping lamp is empty.
In this case, recharge the camping lamp as soon as possible. Failure to do
so may lead to the self-discharge of the integrated rechargeable battery and
thus to a deep discharge which may cause permanent damage to the re-
chargeable battery!
• If you wish to terminate the charging process of the mobile phone earlier, simply
disconnect the mobile phone from the camping lamp.
It is not possible to use the LED light and the charging function at the same
time. To switch the LED light on/off, proceed as described in the chapter
"Using the LED light".
Maintenance and Cleaning
The product does not require any maintenance and should never be disassembled
for any reason. Both the rechargeable battery and the LED lights are permanently
mounted and cannot be replaced.
You can use a clean, dry, soft cloth for cleaning. Dust can be very easily removed with
a soft, clean brush and a vacuum cleaner.
Do not use any aggressive cleaning agents, since these may cause discolouration to
the housing.
Disposal
Electrical and electronic equipment do not belong in the regular household
waste.
Please dispose of the product, when it is no longer of use, according to the
current statutory requirements.
Technical data
Input ................................................5 V/DC, 500 mA
Charging output .............................USB socket type A, 5 V/DC, max. 2 A
Integrated rechargeable..............Li-Ion battery, 3.7 V, 7800 mAh (non-replaceable)
Charging procedure duration...... 16 - 18 h (with completely empty rechargeable
battery)
Light bulb ........................................4 LEDs (not replaceable)
Light colour ....................................6500 K (cold-white)
Light flux .........................................69 lm at 0.5 m and 17 lm at 1 m
Luminous period ............................with fully charged battery max. 28 h
Operating conditions ....................Temperature: -20 °C to +50
..........................................................Air humidity 20% to 85% relative, non-condensing
Dimensions (H x W x D)................98 x 46 x 46 mm
Weight .............................................approx. 203 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent
the technical status at the time of printing.
© Copyright 2014 by Conrad Electronic SE.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis