Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating instructions
Wooden clock, round, Do-It-Yourself
Item no. 1563420
Intended use
This product is intended for displaying the time. The clock case can be assembled of many
individual parts completely without the use of adhesive.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture (e.g.
in bathrooms) must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the
product for purposes other than those described above may damage the product. In addition,
improper use can cause hazards such as a short circuit or fire. Read the instructions carefully
and store them in a safe place. Make this product available to third parties only together with
its operating instructions.
This product complies with statutory national and European regulations. All company and
product names are trademarks of their respective owners. All rights reserved.
Delivery content
• 3 x Assembly kit boards
• Clockwork
• 5 x Clockwork accessories
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
on this page. Follow the instructions on the website.
Explanation of symbols
This symbol is used to highlight important information in these operating instructions.
Always read this information carefully.
This symbol indicates special information and advice on how to use the product.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we will assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General information
• The product is not suitable for children under 8 years of age. Children 8 years and
older must be supervised by an adult during assembly.
• The product contains small parts. They pose a risk of suffocation if swallowed.
• Do not use any force. If a part does not fit, use the included sandpaper to modify it.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorized use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height
may damage the product.
• Consult a technician if you are not sure how to use or connect the product.
• Maintenance, modifications and repairs must be done by a technician or an
authorized repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
• Sandpaper
• Operating instructions
b) (Rechargeable) batteries
• Always ensure that the (rechargeable) battery is inserted with correct polarity.
• The (rechargeable) battery should be removed from the device if it is not used
for a long period of time to avoid damage through leaking. Leaking or damaged
(rechargeable) batteries might cause acid burns when in contact with skin,
therefore use suitable protective gloves to handle corrupted (rechargeable)
batteries.
• (Rechargeable) batteries must be kept out of reach of children. Do not leave
(rechargeable) batteries lying around, as there is risk, that children or pets swallow
them.
• (Rechargeable) batteries must not be dismantled, short-circuited or thrown into
fire. Never recharge non-rechargeable batteries. There is a risk of explosion!
Assembly
Please refer to the accompanying illustrations. Proceed in the order presented.
Inserting/changing the battery
• Insert one AA battery into the battery compartment with correct polarity. Observe polarity as
indicated inside the battery compartment.
• Replace the battery as soon as the hands move more slowly or completely stop.
Setting the time
Set the time using the small wheel above the battery compartment.
Care and cleaning
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may
damage the casing or cause the product to malfunction.
• Use a dry, lint-free cloth and/or a soft brush to clean the product.
Disposal
a) Product
Electronic devices are recyclable waste and must not be placed in household waste.
Always dispose of the product according to the relevant statutory regulations.
Remove any inserted batteries and dispose of them separately from the product.
b) (Rechargeable) batteries
You are required by law to return all used batteries. Batteries must not be placed in
household waste.
Batteries containing hazardous substances are labelled with this symbol to indicate
that disposal in household waste is forbidden. The abbreviations for heavy metals
in batteries are: Cd = Cadmium, Hg = Mercury, Pb = Lead (indicated on the battery,
e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to local collection points, our stores or battery
retailers.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
Technical data
Power supply ................................ 1.5 V battery, type AA (not included)
Current consumption .................... <150 μA
Accuracy ....................................... ±1 second/day
Operating/storage conditions ........ +10 to +50 °C, 20 - 90 % RH
Dimensions (W x H x D) ............... 100 x 142 x 60 mm
Weight .......................................... 175 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming, or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication represents the technical status at the time of printing.
Copyright 2017 by Conrad Electronic SE.
*1563420_v1_0917_02_IPL_m_en
Werbung
