Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
11. Connect the I/O wire headers to camera and then secure the top cover.
12. Connect the Ethernet cable (along with its cable gland) to the camera.
T20
NOTE:
To disconnect a LAN cable, loosen the cable
gland and pull the cable against the socket
wall towards the side of the locking tab.
IMPORTANT:
Make sure all waterproof cable glands have
been properly installed. Water leakage will
cause irrepairable damage to the camera.
EN-7
Werbung
Inhaltsverzeichnis
