General Information - Grundig MC 8340 Bedienungsanleitung

INFORMATION _____________________

General information

The appliance must be cleaned
regularly so that you can continue
to enjoy its top performance and
optimum results.
Cleaning
1
Switch off the appliance with the
On/Off switch
power adapter if you are running
it from the mains.
2
Remove the comb from the appli-
ance. Clean the cutting head
with the supplied cleaning brush.
3
Push the blade outwards to re-
move the cutting head
the cutting head
in the appliance with the supplied
cleaning brush.
4
Insert the cutting head
placing the claw into the cavity
and then pressing on the cutting
head until it clicks into place.
and unplug the
C
A
. Clean
A
and the cavity
A
by first
A
Notes
Never use water or any other
7
liquids to clean the appliance.
Only use the cleaning brush
provided.
You can rinse the combs with
7
water, but you must remove
them from the appliance first.
Remove any clippings after
7
each use.
The cutting head of your appli-
7
ance does not normally need to
be oiled. To maintain the cutting
head in its original condition
for as long as possible, oil it at
regular intervals (with the oil
provided).
Clean the outside of the appli-
7
ance with a soft cloth. Never
use solvents or abrasive deter-
gents.
ENGLISH 23