Grundig MC 8340 Bedienungsanleitung Seite 22

OPERATION ________________________
1 Push the On/Off switch
switch on the appliance.
2
Place the cutting head
hair.
3
Move the cutting head
the direction of hair growth. Apply
only light pressure and cut with
slow, gentle movements.
4
After use, switch off the appliance
with the On/Off switch
Useful tips
Hold the appliance with a re-
7
laxed and comfortable grip.
Always cut against the natural
7
direction of the hair.
As you cut, take a break at
7
regular intervals. Once the hair
has been cut you cannot make a
correction.
22 ENGLISH
to
C
7
on the
A
7
against
A
Notes
7
.
C
7
Only cut a small amount the first
time you use the trimmer.
Comb the hair continuously
while trimming. Look for hair
which is too long and comb out
clippings.
If the appliance becomes
blocked by thick hair while you
are using it, switch it off. If run-
ning it from the mains, unplug
the socket. Remove the comb
and clean the cutting head
with the brush supplied. If the
blades only move slowly or
not at all, clean the appliance
as described in the "Cleaning''
section.
For trimming contours, remove
the comb. Use the appliance
without the combs (cutting
length is 1.5 mm).