Installation At The Radiator Without Adapter; Installation At The Radiator With Adapter - Eurotronic SPIRIT Z-WAVE PLUS Schnellstartanleitung

INSTALLATION AT THE RADIATOR
After succesful inclusion the display
is green blinking (don't press it yet). Follow the steps for instal-
lation.

Installation at the radiator without Adapter

Valve Adapter – Spirit Z-Wave Plus
1.
3.
showsINS and the button
2.
Information on the individual
adapters, see page 34 or
visit:
www.eurotronic.org/
Service/FAQ
30

Installation at the radiator with Adapter

Ventil – Adapter – Spirit Z-Wave Plus
1.
3.
After succesful installation press the green
blinking button to start the adaption. Once
the adaptation is completed, the display
shows the setpoint temperature.
2.
4.
31