Schneider EKOM - 44 Bedienungsanleitung Seite 88

 The power cord must not be trapped or kinked.
 Place the appliance in the centre of the installation opening.
A
19 mm / 20 mm (for the door)
1. Push the appliance (with the door closed) into the built-in opening carefully.
2. Ensure that the power cable will not be trapped or kinked.
3. Ensure that the appliance is placed in the centre of the built-in opening.
4. Open the door and fix the appliance using the enclosed screws (s. fig below).
NOTICE! The upper slot between the appliance and a worktop or board
of the built-in furniture must not be covered by an additional strip.
Otherwise the hot air cannot escape during operation.
88