Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating instructions
USB soldering iron with ceramic
soldering tip 400 °C 8 Watt
Item no. 1553058
Intended use
The product is used to fuse tin-solder in order to connect components to
each other. The power is supplied via a USB port.
This product is intended for indoor use only. Do not use it outdoors. Contact
with moisture (e.g. in bathrooms) must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this
product. Using the product for purposes other than those described above
may damage the product. In addition, improper use can cause hazards
such as a short circuit, fire or electric shock. Read the instructions carefully
and store them in a safe place. Only make this product available to third
parties together with its operating instructions.
This product complies with statutory national and European regulations. All
company and product names are trademarks of their respective owners. All
rights reserved.
Delivery content
• Soldering iron
• Protective cap
• Stand
• Tin-solder
• Operating Instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads
or scan the QR code on this page. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle indicates that there is
a risk to your health, e.g. due to an electric shock.
The icon with an exclamation mark in a triangle is used to highlight
important information in these operating instructions. Always read
this information carefully.
Safety instructions
Read the operating instructions carefully and especially
observe the safety information. If you do not follow the safety
instructions and information on proper handling in this
manual, we will assume no liability for any resulting personal
injury or damage to property. Such cases will invalidate the
warranty/guarantee.
• This device is not intended to be used by people (including
children) with reduced physical, sensory or mental abilities or
lack of experience and/or lack of knowledge unless they are
supervised by a person responsible for their safety or have
received instructions on how to use the device.
• Children should always be supervised by an adult to ensure that
they do not play with the appliance.
• Do not leave packaging material lying around carelessly. It may
become a dangerous toy for children.
• Protect the product from extreme temperatures, direct sunlight,
strong jolts, high humidity, moisture, flammable gases, vapours
and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop
using it and prevent unauthorized use. Safe operation can no
longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient
conditions or
- has been subjected to any serious transport-related stresses.
• Always handle the product carefully. Jolts, impacts or a fall even
from a low height may damage the product.
• Always observe the safety and operating instructions of any
other devices which are connected to the product.
• The soldering tip is very hot during operation. Never touch the
hot soldering tip. This poses a risk of serious burns.
• During working breaks or to allow it to cool, place the soldering
iron with its soldering tip on the included stand.
Place the stand on a heat-resistant surface. Otherwise the
surface may be damaged if the soldering iron slips from the
stand.
• After use, let the product cool down to room temperature before
you store it.
• Do not inhale fumes. Fumes can be harmful to health. Work only
in rooms in which a fume cupboard is present.
Werbung
