Hama MusicBand Shine Bedienungsanleitung Seite 6

• Begin charging by connecting the included USB charging cable
to the charging socket (6) as well as to the USB connection
of a PC/laptop.
• Alternatively, you can charge the headset using a suitable USB
charger. Please refer to the operating instructions for the USB
charger used.
• The status LED (5) lights up constantly in red during the charging
process.
• Charging the battery fully may take up to 2 hours.
Warning
Do not use the headset while it is charging.
• When the battery is fully charged, the status LED (5) goes out.
• Disconnect all cable and mains connections after use.
5. Operation
Switching the headset on/off
• Turn On:
With the device off, press and hold the multifunction button (3)
for 4 seconds until you hear a voice say "Power on". The status
LED (5) lights up in blue for about 1 second.
• Turn Off:
With the device on, press and hold the multifunction button (3)
for 4 seconds until you hear a voice say "Power off". The status
LED (5) will light up in red briefly before the device turns off.
The first time the device is turned on, pairing is automatically started
– see 5.1 Bluetooth pairing.
5