Hama 00176533 Bedienungsanleitung Seite 3

5. Getting started and operation
Note
The following requirements must be met before you can
start operating the product:
• A functioning wireless home network (WiFi/WLAN)
that is turned on
• A mobile device (smartphone, tablet, etc.) that is
WiFi/WLAN-enabled and connected to your home
network
• The MIMOODZ WiFi app, installed on your mobile
device
5.1 Loading the MIMOODZ WiFi app
• Download the MIMOODZ WiFi app from the Apple App
Store or the Google Play Store using your mobile device.
• Start the MIMOODZ WiFi app.
• If you're using it for the first time, you'll have to register
and create a new account. If you already have an
account, log in using your login details.
5.2 Installing the WiFi power socket
• Plug the WiFi socket adapter into a suitable socket.
• Press and hold the button on the power socket for
approximately 5 seconds until the blue LED begins to
flash quickly.
• Now open the menu in the app by tapping the three-
bar icon and tap Devices.
• Tap + in the top-right corner; when the status LED on the
WiFi socket adapter flashes, confirm with Next (Android)
or Device flashes quickly (iOS).
• Now enter the name of your WiFi network and the
password, and confirm with Next.
• The WiFi socket adapter will now be connected. Once the
connection has been established, the status LED stops
flashing. At the end of the connection process, you can
also rename the WiFi socket adapter.
• You can now set up, control and configure your WiFi
smart socket using the app.
• To delete one of the set-up devices, tap the green bin in
the devices view and then tap the Delete icon. Finally
confirm with Delete.
•
•
•
•
3