Eufab 21005 Anleitung Seite 12

Operating instructions
Pic. 1 Remove the protective foil from the stand support of the air conditioning system.
You can now see the magnet that is attached to the stand support.
Pic. 2 Stand support from below. The magnet is in the middle.
Pic. 3 Remove the protective foil from the metal attachment plate.
Pic. 4 Select a suitable surface in the vehicle and affix the attachment plate to a clean and
dry base (dust and grease-free)
Pic. 5 Place the air conditioning system onto the metal plate so that the raised surface of
the attachment plate lies exactly in the groove of the air conditioning system in the
stand support.
Pic. 6 Finished. The air conditioning system (magnet) is now connected to the
attachment plate.
Pic. 7 2 Velcro pads, self-adhesive.
Pic. 8 Remove the protective foils from the Velcro plates. Caution! Avoid contact between
the adhesive surfaces and dusty materials (chair cushions, shirt, trousers etc.). This
can drastically reduce the adhesive power.
Pic. 9 Affix the Velcro plate below the stand support of the air conditioning system.
Select a suitable surface in the vehicle and affix the second Velcro plate on a clean
and dry surface (dust and grease-free).
Pic. 10 Now place the air conditioning system into the Velcro plate so that both Velcro
plates lie on top of each other.
Pic. 11 Finished. The air conditioning system is connected via the Velcro plates.
Pic. 12 To attach using the supplied belt, select a suitable place in the vehicle or on a shelf.
Wrap the belt around the casing of the Mini Air Conditioning System and pull the
belt tight. Ensure that the Mini Air Conditioning System is secure and that the water
tank and the operating elements can be accessed.
Pic. 13 Unscrew the closing cap and fill the tank with cold water.
Pic. 14 Replace the water tank into the casing and wait approx. 15 minutes until the fins of
the water absorber are saturated.
Pic. 15 Fill the 6 water cylinders with cold water.
Pic. 16 For an even better cooling effect, simply fill the 6 ice cylinders with water and
freeze. Replace the frozen ice cylinders into the water tank.
The manufacturer and dealer will not be liable for damage or injury caused by improper
assembly or use.
EUFAB GMBH, D - 42781 Haan, Champagne 6
12