Eufab 21005 Anleitung Seite 10

Belt attachment
The belt can be used to attach the unit when adhesives need to be avoided e.g. in shelves,
cars. Wrap the holding belt around the casing of the Mini Air Conditioning System and attach
to a suitable point. Ensure that the two-level switch and the water tank filling parts remain
accessible.
Installation
Remove the adhesive pad of the metal plate and attach to the required position. Place the
stand support with the magnet onto the metal plate. To ensure that the ventilation functions
adequately, the distance between the Mini Air Conditioning System and yourself should not
be more than 0.5 m.
Function
Open the lid of the water tank casing. Remove the water tank then unscrew the closing cap
and fill the tank with cold water. Replace the water tank into the casing and wait approx. 15
minutes until the fins of the water absorber are saturated. Switch on the Mini Air
Conditioning System via the 2-level switch (I - for slow and II - for fast) to the required speed.
For an even better cooling effect, simply fill the 6 ice cylinders with water and freeze. Replace
the frozen ice cylinders into the water tank.
Cleaning
Open the casing lid and remove the water absorber. We recommend cleaning the absorber's
fins once a week. Clean the fins by brushing carefully with soapy water. After cleaning,
replace the water absorber into the casing and close the lid. You do not need to wait until the
fins have dried off before using the device.
Recommendation
Ensure that the Mini Air Conditioning System is stored in a dry place and protected against
damp.
CAUTION! Use in vehicles
When used in vehicles, the Mini Air Conditioning System needs to be positioned so that it
does not hinder the driver's view. The Mini Air Conditioning System must be attached safely
and tightly to avoid possible accidents (during braking etc.).
Specification:
Operating period: approx. 8 hours
Dimensions: 19.5 x 12.5 x 14.5 cm
Power cons.: Level I = 4.3 Watt, Level II = 5.4 Watt
Ampere 500 mA
Length of cable: 2.5 m
Operation: 12 Volt
10