Herunterladen Diese Seite drucken

Renkforce 1270198 Bedienungsanleitung Seite 4

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

You can monitor additional doors or windows by connecting an additional
magnetic contact in parallel or up to 6 magnetic contacts in series.
Additional magnetic contacts and all necessary cables are not included in
delivery.
Remove the battery compartment lid. There are two screw contacts
beneath the middle round cell battery that can be used to fasten the cables.
Close the battery compartment again.
c) Activate/deactivate the alarm
• Activate the alarm function by sliding the on/off switch to ON. After approx.
3 seconds, a brief beep sounds and the product automatically switches to standby
operation.
• If the door/window is opened or vibrates, a shrill alarm signal sounds for approx.
20 seconds and the LED flashes.
• Slide the on/off switch to OFF to turn the alarm off. As a result, the alarm is
deactivated permanently. In this case, the door/window is no longer secured and
can be opened without setting off the alarm.
Maintenance and cleaning
• The product is maintenance-free apart from occasionally replacing the batteries.
• To clean the product, a dry, soft and clean cloth is sufficient. Do not apply too much
pressure to the housing to prevent scratching.
Do not use any aggressive cleaning agents or chemical solutions as these
may damage the housing causing discoloration and/or malfunction.
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in the
household waste.
At the end of its service life, dispose of the product according to the
relevant statutory regulations.
Remove any inserted batteries and dispose of them separately from the
product.
b) Batteries
You as the end user are required by law (Battery Ordinance) to return all used batteries.
Disposing of them in the household waste is prohibited.
Contaminated batteries are labelled with this symbol to indicate that
disposal in the domestic waste is forbidden. The designations for the heavy
metals involved are: Cd = Cadmium, Hg = Mercury, Pb = Lead (name on
batteries, e.g. below the trash icon on the left).
Used batteries can be returned to collection points in your municipality,
our stores or wherever batteries are sold.
You thus fulfil your statutory obligations and contribute to the protection of the
environment.
Technical data
Power supply .......................................3 x button cell type LR44
Current consumption ..........................90 mA (operation)
Volume ..................................................100 dB
Automatic power-off...........................after 20 seconds
Operating conditions ..........................0 to +40 °C, 10 – 80 % RH
Storage conditions..............................-20 to +60 °C, 5 – 90 % RH
Dimensions (W x H x D)......................approx. 72 x 70 x 9 mm
Weight ...................................................37 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the
technical status at the time of printing.
© Copyright 2014 by Conrad Electronic SE.
8 µA (standby)
V1_1114_02-ETS-Mkd

Werbung

loading