Belkin F8T030 Benutzerhandbuch Seite 54

abc-3 4:24:2003 0:53
If you have set the IP address manually:
• You may not have a set a default router (default gateway).
• You may not have set a DNS server.
Go back to the AP home page (http://1.2.3.4 if using Bluetooth client to configure)
and select the Configuration page. On this page, set the default router and the
DNS server(s).
If you have a DHCP server [such as a NAT box] on your network to give the AP an IP
address, then you may have one of these problems:
• The DHCP server is not responding to the AP's requests.
• The DHCP server is not supplying the DNS server or the default router.
Page 51
T R O U B L E S H O O T I N G
51