Led Bluetooth - VIERLING VIT-A2 Bedienungsanleitung

VIERLING
:
N
OTE
This LED also lights up briefly after power-on or
after switching to the "ADSL Test" operating mode
while the tester is performing a self-test. At this
point the LED also shortly lights up orange twice.
However, this is not yet related to connection setup
since successful synchronization is always preceded by
a negotiation phase (as described above).
Based on the color of the LED (green or orange), you can determine which
DSL service is being used:
• LED lights up green:
ADSL in compliance with ITU G.992.1 or ADSL2 in compliance with
ITU G.992.3.
• LED lights up orange:
ADSL2+ in compliance with ITU G.992.5.
4.6

LED Bluetooth

The green "Bluetooth" LED lights up as long as a Bluetooth module is
detected and activated.
A Bluetooth module is available in the form of an optional plug-in board for
the VIT-A2 to allow wireless transfer of DSL connection parameters from
the tester to a mobile PDA.
This LED does not have any meaning in testers which do not have the
Bluetooth module.
34 70299.207 – 1.3 – 20070802 – VIT-A2