Safety Instructions - VIERLING VIT-A2 Bedienungsanleitung

VIERLING

1. Safety instructions

General information
This device was built and tested in conformity with DIN EN 60950-1 VDE
0805-1 "Information technology equipment - Safety" and left our plant in
perfect working order. To maintain this state and ensure safe operation,
the user must heed the following instructions and warnings.
Transport
The device should be transported only in its original packaging (to protect
against shocks and impact). Condensation can occur if the device is
brought from a cold environment into the room where it is to be operated.
The device must be absolutely dry prior to being operated. Accordingly, an
acclimatization period of at least two hours is required.
Setup
Only trained technicians working in the field of electronics may operate the
device described here.
Protect the device against direct sunlight and heat.
The device should be operated or charged only with the supplied (original)
AC adapter.
Exchanging the batteries: You must use size AA (1.2 V) nickel metal
hydride (NiMH) rechargeable cells. When inserting the batteries, make
sure you take note of the polarity symbols inside the battery compartment.
You should also be sure to properly dispose of old batteries.
W
ARNING
There is a risk of explosion if you do not exchange
the batteries properly!
During a thunderstorm, do not connect or disconnect the data
communications lines.
24
:
70299.207 – 1.3 – 20070802 – VIT-A2