Care, Cleaning And Storage; A) Cleaning; B) Storage; Disposal - BASETech 1561345 Bedienungsanleitung

11. Care, cleaning and storage

Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these could damage the
casing or stop the product from functioning properly.

a) Cleaning

Before cleaning the product, it must be disconnected from the mains and allowed to cool to ambient temperature.
The "conical nozzle" (1) must not be soiled and needs to be cleaned with a cloth or a brush. Use a dry, lint-free cloth
to clean the product.

b) Storage

After use, place the product on a level, fire-resistant surface until the hot product parts have cooled. The storage
location must be dry and of moderate temperature. Note the storage conditions in the technical data.

12. Disposal

Electronic devices are recyclable waste and must not be disposed of in the household waste. Always
dispose of the product according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to protection of the environment.

13. Technical data

Operating voltage .............................................230 V/AC (50 Hz)
Power ...............................................................2000 W
Temperature max. .............................................650°C
Cable length .....................................................Approx. 150 cm
Protection class ................................................Protection class II
Operating/storage conditions ............................ -10 °C to +50 °C, 0 % to 65 % relative humidity, non-condensing
Dimensions (L x W x H) ....................................max. 100 x 19.5 x 7.5 cm
Weight ..............................................................1 kg
27