Safety Instructions - Quadral AURUM M8 Bedienungsanleitung

Technische Daten P8
Eingangsimpedanz (XLR)
Eingangsempfindlichkeit (XLR)
Geräuschspannungsabstand (XLR) A-bewertet
Eingangsimpedanz (Line)
Eingangsempfindlichkeit (Line)
Geräuschspannungsabstand (Line) A-bewertet
Eingangsimpedanz Phono MM
Eingangsempfindlichkeit Phono MM
Geräuschspannungsabstand (Phono MM) A-bewertet
Eingangsimpedanz Phono MC
Eingangsempfindlichkeit Phono MC
Geräuschspannungsabstand (Phono MC) A-bewertet
Spannungsverstärkung (Line)
Maximale Eingangsspannung (Line)
Max. Spannung am XLR-Ausgang
Ausgangsimpedanz (XLR)
Max. Spannung am RCA-Ausgang
Ausgangsimpedanz (RCA)
Regelbereich Volume
Regelbereich Balance, Bass, Höhen
Regelbereich Vorpegel
Regelgenauigkeit
Kanalgleichheit
Frequenzgang
Harmonische Verzerrungen
Kopfhörerausgang Stereo
12V Link Anschluss (Kurzschlussfest)
SIS (Auto On/off)
Netzanschluss
Leistungsaufnahme (Normalbetrieb)
Leistungsaufnahme (Standby)
Analog Eingänge
Digital Eingänge (24bit / 192KHz)
USB
Ausgänge
Abmessungen (B x H x T)
Gewicht
* Breite mit Holzseitenteilen, Höhe mit Füssen, Tiefe mit Lautsprecherklemmen
14
47 kOhm
100mV
94 dB
47 kOhm
100mV
94 dB
47 kOhm
2,6mV
90 dB
40 / 120 / 600 Ohm
0,26mV
74 dB
45 dB
6V
15V
300 Ohm
8 V
600 Ohm
99 dB
+/-6dB
-6dB
0.1dB
besser 0,05dB
1Hz-110kHz (-3dB)
<0.03%
6,3mm / 600 Ohm
3,5mm Mono Miniklinke
nach 15 Min. ohne Signal
115V/230V umschaltbar
10 W
<0,5W
4 Paar RCA, 2 Paar XLR, 1 Paar Phono
1 x Optisch / 1x Koaxial
1 x USB / Typ B (48KHz)
2 Paar XLR, 1 Paar RCA
453 x 82 x 330 mm*
5,31kg
First of all, we would like to thank you for choosing our AURUM M8 / P8 pre-ampli-
fier combination. We manufacture top-quality HiFi equipment which we hope will
delight you each time you use it. Our goal in all of this is to truly satisfy the require-
ments of music lovers just like you.
Even though you may already be knowledgable in using this type of equipment,
we'd still like to introduce some basic rules and guidance that will enable you to
get the best out of your purchase. Please do take a few moments to read this infor-
mation.

Safety instructions

Please read through these instructions carefully and follow all of the steps listed here
for installing the equipment.You must abide by all of the warnings and safety instruc-
tions that are stipulated on the unit and in this instruction manual. Keep this manual
close to hand so that you can consult it if you have any questions later on.
The lightening symbol inside an
equal-sided triangle is used to
warn you about the presence
of non-insulated components
carrying a dangerous, live
voltage that might cause severe
personal injuries.
• The mains power cable and other connecting cables must be laid so that none
of them are crushed or damaged by furniture, are being trodden on, and / or
that nobody will trip over them.
• Take the power plug out of the socket during lightening storms or if the equip-
ment will not be used for a long time. Always pull the plug out of the socket and
never remove it by pulling on the cable!
• The amplifier's speaker terminals must only be connected up to the relevant
inputs on the speakers. You must never connect these terminals up to the electri-
cal mains supply (230V / 115V) as this will destroy the equipment and all inter-
connected units immediately. Therefore you must never fit plugs on these cable
connections to ensure that they can never be mixed up with mains plugs.
• Voltages above 30V can be present at the speaker terminals if high volume is
being used. Therefore you should never touch the terminals when the amplifier is
being used.
The exclamation mark inside an
equal-sided triangle indicates
that there is important information
available regarding the use and
maintenance of your equipment.
15