Imperial STREAMY 1 Bedienungsanleitung Seite 46

6. OPERATION
If the status starts flashing with red light, please disconnect the device
from mains, and connect it again after some seconds.
STREAMY 1 starts up with the network settings, while the status LEd
is flashing with blue light that indicates the login process to selected
network.
E
If the status LEd is still flashing in red or blue color after several
minutes, please check, wether the Wifi key was entered correctly.
With the wrong Wifi key, it is not possible to login with the selected
network.
In this case, please reset the device by using the reset button.
Please see page 39 also.
user Manual
46