Product And Package Contents; Preliminary Warning Notices; Initial Operations, Safety Instructions; Connect An Easily Accessible Interlock Connector Or Circuit Breaker - RTI NEO ONE Bedienungsanleitung

Manual: RTI NEO ONE

1. Product and Package Contents

Please check if all listed parts are included and undamaged. Included in delivery:
1 x laser projector
1 x data cable

2. Preliminary Warning Notices

1. Please use this device only according to these operating instructions.
2. Do not use the device if there are any visible damages on housing, connector panels,
power supplies or power cords.
3. Never look directly into the light source of a laser projector. Danger of damage to the
eyes or even blindness in extreme circumstances!
4. Do not operate the device at high humidity or in the rain.
5. Protect device against dripping or splashing water. Do not place any liquid filled con-
tainers near to this device.
Any warranty claims are void if the warranty label is removed or tampered

3. Initial Operations, Safety Instructions

1. Only use the RTI NEO ONE with the speci-
fic RTI NEO ONE PSU.
2. Make sure that the device is not connec-
ted to mains during installation.
3. Installation has to be done by technical
experienced and qualified persons ac-
cording to safety regulations of the res-
pective country.
4. Always ensure that maximum permis-
sible exposure (MPE) is not exceeded
in areas accessible to the public or
members of staff.
5. In some countries an additional
pection by technical control institutes
could be necessary.
6. Connect an easily accessible inter-
lock connector or circuit breaker
to the RTI NEO ONE PSU.
7. The power supply should be easily acces-
sible.
page 4 / 48
1 x NEO ONE power cable
1 x spring clamp connector
with in any way.
8. When installing the laser mount it with
9. When connecting several RTI NEO ONE
10. Never load a connector with more than
11. For safe setup e.g. on walls or ceilings
ins-
12. If the device has been exposed to great
1 x manual
a minimum distance of 15 cm from walls
and objects.
devices to each other, make sure the
spring clamp connector is tightened.
100 kg!
please use a safety cord. The safety cord
should be able to withstand tenfold the
weight of the device. Please follow the
accident prevention regulations of pro-
fessional associations and/or comparable
regulations for accident prevention.
temperature changes, do not switch it
on immediately. Condensation (or any
moisture/water formed) may damage
this device.