Lesswire WI2U Schnellstartanleitung Seite 16

After clicking on the „Save" button, the PIN will be automatically stored.
This is followed by automatic provider recognition. When you accept the settings by
clicking on the „Yes" button, these settings are automatically saved to your SIM card
and the overview page is displayed.
30
The settings for the SIM card can later be changed under menu item „Settings/3G
UMTS".
Your router is now ready for mobile internet access (3G LED lights up). For further
configuration settings, refer to chapter „Settings".
Important Notes
Internet Settings / Provider Data
If your provider is not recognised by the router, you can request the APN settings, and,
if necessary, further settings directly from your provider and enter them manually.
Connect to the Wi2U via WLAN
Logon to the Wi2U router by launching the Internet Browser, enter the address
„http://router.wi2u" and select menu item „Settings".
Enter the system password: „admin".
Under submenu item „3G/UMTS" you can enter the APN settings, and, if required,
enter and save other settings in the advanced menu.
Roaming is deactivated by default.
Changes to this setting can be made as follows:
Connect to the Wi2U via WLAN
Logon to the Wi2U router by launching the Internet Browser, enter the address
„http://router.wi2u" and select menu item „Settings".
Enter the system password: „admin".
You can activate roaming under the submenu item „3G/UMTS".
31