Cleaning, Maintenance And Storage; Problems And Solutions - Mantis BMOW40-4325 Betriebsanleitung

4. Cleaning, maintenance and storage

DANGER!
Switch the appliance off and remove the
contact key before any adjustment, clean-
ing and servicing work. Wait until all rotating
parts have stopped and the appliance has
cooled down.
Keep hands away from all cutting edges and
moving parts. Fingers can be pulled into cut-
ting carriage and be cut or crushed.
After every work stint, clean the machine thoroughly to
remove all dust and debris, and repair or replace any
faulty parts.
Check the collection bag at regular intervals for any wear
and aging.
Clean the ejection opening and cover at regular intervals.
Keep the device, in particular the air vents, clean at all
times. Never spray water on the device body!

5. Problems and solutions

Defect
The motor does not
start
Unsteady running,
strong vibrations
Poor mowing/catching
performance
Grass is not collected
Cordless Lawn Mower Operating Instructions
Cause
Battery is empty
Battery is defective
Contact key is not inserted
Main switch or safety arch is not controlled
Blade is damaged
Blade is loose
Blade is blunt
Battery is defective
Collection bag is blocked
Mowing height adjustment not regulated
Blocked channel
Full collection bag
Too wet grass
Never clean the machine and its components with sol-
vents, flammable or toxic liquids. Us only a damp cloth
making.
Keep all nuts, bolts and screws tight to be sure the equip-
ment is in safe working condition;
Only a regularly maintained and treated appliance can
serve as a satisfactory aid. Insufficient maintenance and
care can lead to unforeseen accidents and injuries.
Repairs and works specified in these Instructions may
only be performed by qualified authorised staff.
Use only original accessories and original spare parts.
Using other spare parts can result in accidents/injuries
of the user. The manufacturer will not be liable for any
such damage.
Please contact our service department if you need ac-
cessories or spare parts.
The appliance must be stored in a dry place and pro-
tected from frost.
Lock the device in a proper place to protect it from un-
authorised use.
Let the engine cool down, before you store the device in
a closed room.
Removal
Charge the battery
Consult customer service
Refer to the instructions in these operating
instructions.
Refer to the instructions in these operating
instructions.
Replace the blade
Check and tighten the blade clamping
Have the blade sharpened or replaced
Consult customer service
Empty the collection bag
Adjust the mowing height
Clean the ejection channel
Empty the collection bag
Cut in dry weather
GB-6