Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Coding
To differentiate transmitter-/receiver-combinations, or if other systems are operated in the
neighbourhood, the radio-code of the transmitter may be selected out of 6561 options
individually.
After releasing the screws on the rear side, the transmitter's case
can be split in two pieces. The Tri-DIP-selection switch is located
on the button-side of the board. Each of the switches has 3
setting positions (+|0|-).
Please note, in case the transmitter-code or the transmitter itself should be
changed, the corresponding receiver must be re-programmed with a new code.
Battery
Depending on the frequency of use, of the transmitter the battery life can vary. If the typical
range of operation becomes substantially reduced, the battery should be replaced.
Take care of correct polarity!
Use only 12V-Alkaline batteries!
Technical Details
Radio-Frequency
Codes
Operating Voltage
Current
Ambient temperature
Storage temperature
Dimensions
:
433,92 MHz
:
6561, selectable
:
12 V - Alkaline - Battery
:
typ. 14 mA average
o
:
-10
C to +65
:
-40°C to +85°C
:
100 mm x 37 mm x 19 mm
- 5 -
o
C
Werbung
