Ferm FIW-500 Übersetzung Der Originalbetriebsanleitung Seite 4

EN
IMPACT WRENCH FIW-500
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europeís leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive Warranty.
We hope you will enjoy using this product for
many years to come.
The numbers in the text refer to the diagrams
on pages 2-3.
Read the operating instructions
carefully before using this device.
Familiarize yourself with its functions
and basic operation. Service the device
as per the instructions to ensure that it
always functions properly. The
operating instructions and the
accompanying documentation must be
kept in the vicinity of the device.
Introduction
Your impact wrench has been designed for firmly
tightening and loosening fasteners.
Contents
1. Machine information
2. Safety instructions
3. Mounting accessories
4. Operation
5. Service & maintenance
Contents of packing
1 Impact wrench
10 Air sockets, 9,10,11,13,14,17,19,22,24 and
27 mm
1 5" Extension bar
1 Oil pot
1 Hex wrench
1 Nipple
1 Mini oiler
1 Instruction manual
1 Safety instruction
1 Warranty card
Check the appliance, any loose parts and
accessories for damage caused during transport.
4
1. MACHINE INFORMATION
Technical specifications
No load speed
Max. operating pressure
Air consumption
Air inlet
Bolt size capacity
Max. torque
Weight
Lpa (sound pressure)
Lwa (acoustic power)
Vibration
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in
EN 60745; it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned
- using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
- the times when the tool is switched off or when
it is running but not actually doing the job, may
signifi cantly reduce the exposure level
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping your
hands warm, and organizing your work patterns
Product information
Fig. A
1. Trigger switch
2. Impact force adjusting knob
3. Air hose connection
4. Accessory holder
5. Forward/reverse switch
2. SAFETY INSTRUCTIONS
Explanation of symbols
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-obser-
vance of the instructions in this manual.
7000/min
6.3 bar
228 l/min (8 cfm)
1/4" - 3/8"
16 mm (5/8")
310 Nm
2.2 kg
84.4 + 3 dB(A)
95.4 + 3 dB(A)
2.6 + 1.5 m/s
2