Servicing And Cleaning Ing Ng; Maintaining And Cleaning The Faucet; Ng The Fauce; Replacing The Cartridge Dge - Ernesto 78570/II Bedienungsanleitung

©
Servicing and cleaning
©
Maintaining and cleaning the
faucet
Please note that sanitary fittings require special care.
Please observe the following instructions:
Dry your taps with a cloth after every use in
order to avoid the build-up of any limescale.
Clean your fittings with clean water, mild deter-
gent and a soft cloth or leather only.
Do not use any agents to remove limescale,
acidic cleaning agents or scouring agents of
any kind. Do not use corrosive or alcohol-
con-taining agents for cleaning (including for
coloured surfaces).
Dry your taps with a cloth after every use in or-
der to avoid the build-up of any limescale.
Unscrew the mixing nozzle
vals and remove any limescale deposits or for-
eign bodies. If it is very dirty or damaged, re-
place the mixing nozzle
which you can order through the service centre
indicated.
Note: The mixing nozzle
unscrewed by hand. Otherwise you can use a
23 mm wrench and you must lay a thin, damp
cloth around the mixing nozzle
do not damage it. A pipe wrench with plastic
jaws is also suitable. In any event, make sure
that you do not damage the mixing nozzle
If the care and maintenance instructions are not fol- ntena ten
lowed, damage to the surface of the fitting can be e to the surfa to the sur
expected. Claims under the warranty are excluded laims under th laims und
in this case. se.
© ©
Replacing the cartridge R R epl epla
A A cart A cartridge is a wear part that needs replacing
7
according to the hardness and / or degree of
contamination of the water. This becomes evident
when the handle becomes difficult to move.
1
New cartridges can be obtained from the listed
service office.
Servicing and cleaning / Disposal / Information
at regular inter-
23
with a new one,
23
can normally be al y be
23
can use a n use
a thin, dam hin, dam
so tha so tha so that you
23 3
wrench with wrench with
a y event, m y event, m
age the e the mi i
23
nce inst nce inst
Proceed as follows to replace the cartridge
1. Shut the main water supply off.
Allow the remaining water to run off.
2. Remove the hot/cold plate
the locking screw
an anticlockwise direction.
3. Pull the handle
4. Unscrew the cartridge cover ring
5. Release the cartridge securing ring
it and pull the complete cartridge
body of the faucet.
6. Place the new cartridge into the body of the fau-
cet in exactly the same way. Make sure that the
seal is fitted properly under the cartridge. Make
sure that the guides are in the corresponding
holes.
7. Replace all aforementioned parts. Tighten the l aforement foremen
cartridge securing ring e securing e securing
holding the faucet in place against the rotating ing the fau the fauc
movement. movement. This ensures tightness and prevents vement T
the lever mo the lever motion from becoming sluggish. he leve
© © ©

Disposal

D
e
To protect it from any damage in transit, this product
is delivered in secure packaging. The packaging
consists of recyclable materials. Please dispose of
them in an environmentally friendly way.
. Do not throw the product away with normal domestic
waste at the end of its useful life; instead, please
contact your local authority to find out how you can
dispose of items in an environmentally friendly way.
©
Information
©

Potability of mains water

Find out about the potability of your mains water
supply. Your local water authority or water sup-
ply company will be able to inform you.
and unscrew
3
with the Allen key
2
upwards and off.
1
.
4
beneat beneath beneath
5
out of the out of t out of
7
e body of body of
way. M y. M ke s k
under the under the c
es are in the es are in th
hand-tight whilst
5
GB/IE
:
7
in
29
9