Bluetooth ® Pairing - Hama Gentleman-L Bedienungsanleitung

Note – Automatic shutdown
Note that the speaker will automatically switch
off after 10 minutes without action (no audio
playback/no Bluetooth
4.2 Charging the battery
Warning – Rechargeable battery
• Only use suitable charging devices with USB
connections for charging.
• As a rule, do not use charging devices or USB
connections that are defective and do not try to
repair them yourself.
• Avoid storing, charging or using batteries in
extreme temperatures.
• When stored for a long period of time, batteries
should be charged regularly (at least every three
months).
Warning
• Do not charge the product using the USB
connection on your PC/laptop. This can cause
damage to the USB connection.
• Charge the speaker fully before using it for the first
time.
• Connect the included Micro-USB charging cable to
the speaker's Micro-USB port (2).
• Connect the unused connector on the Micro-USB
charging cable to a suitable USB charger. Please refer
to the operating instructions for the USB charger
used.
• The status LED (1) lights up constantly in red during
the charging process.
• If the battery is fully charged, the status LED (1) will
go out.
function).
®
Note – Charging
• It takes approx. 6 hours to completely charge the
product.
• The speaker's battery can be charged whether the
speaker is on or off.
• If the battery capacity is less than 10%, the
speaker will emit two acoustic signals. You will
only receive this information if the speaker is on.
• The actual battery life varies depending on use of
the device, the settings and the ambient conditions
(rechargeable batteries have a limited service life).
4.3 Bluetooth pairing
®
Note
• Check whether your mobile device (MP3 player,
mobile phone, etc.) is Bluetooth
• Note that the maximum range for Bluetooth
10 metres without obstacles such as walls, people,
etc.
• Make sure that your Bluetooth
device is on and Bluetooth
• Make sure that the speaker is located within the
Bluetooth
range of max. 10 metres.
®
• Switch on the speakers as described in 4.1
Switching the product on and off.
• The status LED (7) begins to flash. The speaker
searches for a connection.
• Open the Bluetooth
®
and wait until Hama Gentleman-L appears in the
list of Bluetooth
devices found.
®
• Select Hama Gentleman-L and wait until the
speaker is listed as connected in the Bluetooth
settings on your terminal device. An acoustic signal
confirms that connection was successful.
• The status LED (7) now remains red.
Note – Bluetooth
• Some terminal devices require a password in order
to connect to another Bluetooth
• If your terminal device requests a password for
connection to the speaker, enter 0000.
capable.
®
capable terminal
®
is activated.
®
settings on your terminal device
password
®
device.
®
is
®
®
3