Totally Wicked aio Style 2 Bedienungsanleitung Seite 9

Using your aio Style 2
Output Modes:
To shift between output modes,
when the device is powered off hold
the power button for 5 seconds and
the button light will flash 5 times.
When the light flashes red, constant
output mode is activated, providing
a constant output of 3.5V. When
the light flashes white, direct output
mode is activated; in this mode the
output of the device will be the direct
voltage of the battery cell.
Cleaning the Tank:
To clean the tank, remove the cap
and fill the tank with water to just
below the opening, being careful not
to spill any liquid onto the device.
Hold the device in one hand and
place your thumb over the opening
to create a seal, shake the device
vigorously for around 5 seconds.
Replace the water and repeat 2 or
3 times. Finally, dry the tank with a
clean cloth or tissue paper.
9