Hama 00176910 Bedienungsanleitung Seite 6

Note – Manual search
• The manual search is automatically aborted after 7 minutes.
• Using the RCC button (10) frequently will drain the battery. We recommend
only using this function to seek out an optimal location for the device.
Note – DCF signal
• When not in use, the DCF signal can be switched off by pressing and
holding the +/RCC button (10) for approximately 3 seconds.
Note – Summer time
• The clock automatically switches to summer time. DST (6) appears on the
display as long as summer time is activated.
5.2 Manually setting the date/time
• Press and hold the MODE button (9) for approximately 3 seconds until the
hours display begins to flash.
• Set the following information in the order listed:
• Time zone (+12/-12), Hours, Minutes, Year, Month, Day, Language
• To select the individual values, press the +/RCC button (10) or the -/°C/°F
button (11), and confirm each selection by pressing the MODE button (9).
• Press the MODE button (9) immediately to adopt the set value displayed
and skip ahead.
• If you do not make an entry for 20 seconds, you automatically exit the
setting mode.
5