Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
STUTTER EFFECT
You can use your loop to create a stutter effect and it will add extra creativity to your performance.
Every time the RELOOP button is pressed, whether the loop is playing or not, it will restart the pre-programmed loop at once. You can
press RELOOP BUTTON repeatedly to create the stutter effect.
You can also repeat to tap the CUE/
TAP BPM
AUTO BPM is the default mode when power on. You can switch Manual/Auto BPM by pressing the "TAP BPM" button.
Notice:
Switch manual BPM on just need one touch the button.
Switch Auto BPM on by pressing the "TAP BPM" button more than 2 sec. and then the LCD will display "AUTO BPM".
There are two modes for BPM count as below:
1.
Manual BPM: following the music tempo and press the "TAP BPM" button to count BPM value; from the auto BPM to manual
mode, the value won't change until the correct BPM value is counted.
2.
Auto BPM: counting BPM value automatically without pressing" TAP BPM" button.
SYSTEM SETTING
SETUP MODE：
Press the TIME button for more than 2 seconds to enter system setting mode. At this time, LCD display "PRESET" and the SETUP LED
will lit.
Note: System setting will be closed automatically when more than 10 seconds no function.
Turn the TRACK knob to scroll through the different submenus, you can adjust the setting by stopping on the desired submenu and pushing
the TRACK knob.
To exit the system settings, you can turn the TRACK knob counterclockwise to PRESET submenu and then press the TRACK knob.
Once enter the SETUP mode you can browse the items by turning TRACK knob, and pressing TRACK knob to on or off item selection, see
more details of the different submenus and options as below:
PLAY MODE: This function allows you to choose single-track play or
Continuous track play (all tracks in order).
- The default setting is CONTINUOUS play.
AUTO CUE: This will indicate if the Auto Cue is on or off.
- The default setting is AUTO CUE on.
RELAY: Press the TRACK knob to switch the RELAY on and off.
RELAY: OFF-The left and right players will automatically be in the continuous play mode.
RELAY: ON-The left and right players will automatically be in the single play mode.
- The default setting is RELAY OFF.
Reset all: in the "Reset all?" section, this will reset all your programmed menus and restore the unit to its default settings. Press the
FOLDER knob will return all function setting to default setting automatically and then "reset OK" will display in the LCD.
button to create the stutter effect.
Werbung
Inhaltsverzeichnis
